Finished to perfection because of a good cooperation! 
Alan Schoffield from UK and BBT joined together in this project.

We bring you the rear side panels for late bay window bus.
Started our reverse engineering from NOS panels for absolute perfection.

Both sides come with sliding door rail pre assembled.
Left side will fit perfect for RHD or Double Door with some minor adjustments

The left side is all correct for '71 up.
Right side features the '74 and later fuel cap hole.

Another fine Silver Weld Through addition to our Bay Window Bus sheet metal program.

We keep expanding our Split Window Bus SWT line.
The 61-67 model upper side panel is now available.

The low hinge single window upper side panel to build the perfect 11-window bus.
Now we supply all models upper side panels with windows HERE

The missing brake adjusting screw is now available.
Volkswagen changed brake adjusting screws a few times in the early years.

We never had the correct 54-57 brake adjusting screw.
That change today, we add the correct inclined brake shoe adjusting screw.

Correct brake shoes for 54-57 beetles you can find HERE
The three different brake adjusting screws HERE

Out of popular demand we add the "big nuts and washers".
These washer & nuts hold the six "big" M12 engine case studs.

BBT M12 case nuts come with correct 17mm key width.
BBT M12 Case stud washers are correct 3mm thick.

Handy, nice, and correct.
We bring a reproduction from the VW socket wrench.

This Socket Wrench was in every VW tool roll since new.
Lost, used (or overused) for a thousand different things, rusty or broken.

This socket wrench is missing in many cars now.
But no longer, as BBT brings you brand new.

One side is 19mm, the other side is 21mm like original.
Fits sparkplugs, lug nuts, generator nut, or even your drain plug and more.

More tool roll content to come…

As ATE discontinued we decided to follow an alternative brand.
Better alternative brakes as no brakes at all, correct? 

However, we do like the quality and offer at a fraction of the (old) price.
Good breaking does not have to be expensive.

Our complete line of BUS brake master cylinder HERE

Stay tuned for more exciting parts to make our VW life more easy.
BBT NEWS TEAM wish you a fantastic weekend.

BIG NEWS for engine builders.
BBT stocks again  steel backed main bearings !

Mahle has two factories making main bearings.
For a longer time we follow Mahle Metal Leve plain aluminum main bearings HERE

We're proud to announce we now stock  Mahle Clevite steel back main bearings too.
Steel back main bearing gives less friction from your drive line to your engine case.

This strength and rigidity result in better performance and a longer life of your engine case.
Steel back engine bearings are simply a must for high performance engines in a magnesium engine case.

First stocks already arrived, more to follow.

Same time we also tock  Mahle Clevite rod bearings.

These metal repair panels are for the underside of your T25/T3/Vanagon.
For correct repair of the underside of your front outriggers left and right left and right.

More T25/T3/Vanagon news.
Chassis section underside rear left and right now also available.

Windshield washer valve on the back of your wiper switch.
Used on 1972 and later Beetles, Ghia, 181, Type 3 & 4.

Earlier model windshield wiper switches HERE
Later model windshield switches HERE

Keep that windshield clean.

Another BBT production finished.
Power brake push rod for Bay window buses.

Made to our exact preferences.
Perfect fit for a perfect operation.

Comes with counter nut to secure in brake booster.
Pin and clip to pedal not included.

Because of our own production we reduced price tremendously. 
All other bay window pedal parts HERE

Massive arrivals this week.
Some high lights of fresh inventory.

We keep on moving.
More important new products are docking in the upcoming weeks.

Stay tuned!
BBT NEWS TEAM wishes you a warm and nice spring weekend.

We launch the brake pads for BBT & TRW brake calipers.
BBT brake caliper 1248-010 needs a slightly different brake pad.

These brake calipers use a pin & spring mounting for their brake pads. 
Because of this spring these pads are slightly different.

The difference is in the height between the pin holes. 
For BBT/TRW brake pads this is higher than for calipers using a spring plate.

Our complete VW brake pad line HERE

In our type 34 Karmann Ghia range we launch this week different headlight and indicator seals.
Get yours now. 

Brake inspection plug time!

The inspection holes on your backing plates are sealed with rubber plugs.
This to avoid water and dirt coming in your brake system. 

Up to 1968 model year they have been single plugs originally.
1969 and later cars had the "tandem" plugs. 

These plugs have the same diameter, but are simply with two connected to each other.
These "tandem" plugs are new to the BBT program as from today. 

Single plugs BBT # 1295 available HERE

We redid the connecting clip for plastic window trim. 
They're now nicely round exactly as original.

We made them with the correct clips at the bottom, exactly like original. 
Fabricated in stainless steel for endless use and good looks. 

We also lower the price dramatically. 
All our window trim connecting clips HERE

We got a nice load of wiring loom harnesses in this week 
and many other parts came back in as well.

BBT NEWS TEAM wishes you a wonderful weekend.