Newsletter July 2012
Summertime! Finally, all convertibles are ready to go. Ladies and Gentlemen start the engines! Each week there are some nice meetings. Volunteers are giving the best of themselves for hours, days, weeks and even months and organize meetings in our beloved hobby world. We already have attended to a couple of them!
Economically the second elections in Greece are over. After the angry first round of ‘protest’ elections, it seems that even the Greek realize that leaving the Euro zone would be a bad thing to do, not only for them, but for all Europe and to put in mildly a shock for the whole world. It’s unbelievable how a small European community can put such a pressure on all the rest.
Let’s compare with the USA. There Greece would be the size of a city something like Detroit. In Detroit life is not a bed of roses neither. Vacancy, unemployment, poverty, crimes, just name it, it’s very bad… but we hardly hear anything of it. The reason? In the United States there is one government with one state of mind, all going in the same direction, something that we are missing in Europe. With us everyone has a vote, each country, each community. No penalties are imposed when budgets are not complied with for instance (except from the expensive interest rate for loans from the European Central Bank). It makes a good economic policy very difficult. Should we have tomorrow a Central government in Europe for economic affairs with the necessary authorities, everything would look different at once!
In fact it’s easy to say that it will be that or the end of the Euro sooner or later. Certainly when countries such as Spain and Italy are getting in the spot lights. They have great problems to finance their national debts. To speed up the economic progress and to turn the crisis throughout the world, we must attend to this European government at once, so that we can get again on the right course. Even if it is at the expense of a part of the sovereignty of the member states.
After all we must think ‘European’, not as a small country, except for social and cultural matters. People should not be afraid, we were never so well off!
Good life automatically translates itself in leisure time and hobby. Never before so much money has been spent on hobbies and leisure. Our Volkswagen hobby definitely is a good example! And isn’t this pleasant? We enjoy it of course and we try to pass this pleasure into our working mind on the pretext of good, better, best!
The offer of meetings and gatherings confirm this story in the whole world, in fact it’s just too good to be true. We must all dare to enjoy life. And that’s exactly what we are going to do this summer, enjoying the weekends with our Volkswagens, and working hard during the week to give a maximum opportunity to as many people as possible to equalize this feeling the next weekend…
Let’s build together on this Volkswagen legend, a story that is really too good to be true, but that has been made in all sincerity by you and me! Life can be beautiful!
I wish you a nice summer, good business, no problems and above all much quality of life.
BBT will attend to following major meetings this summer:
# 1715-075 Piston liner kit, 1200 CC - 83 mm (4 pieces) - AA Performance
changed to # 1715-075 Piston liner kit, 1200 CC - 83 mm/ 90mm case (4 pieces) - AA Performance
# 0518 OEM style window crank 68-
changed to # 0518 OEM style window crank 08/69-74
# 0518-01 Window crank original 65-68
changed to # 0518-01 Window crank original 08/67-07/69
# 0427 Door latch Type 1 08/67- with keys
changed to # 0427 Door latch Type 1 08/67- with keys
# 0525-060 Radio block off plate Type 1 58-67
changed to # 0525-060 Radio block off plate Type 1 58-67 (kit)
# 1761 Push rod tube + springs, 8 pieces
Now from Scat
Old quality available as # 1764
No longer available
- # 0573-03 Automatic seat belt green
- # 0622-05 Taillightlens 68-73 (USA) eco
- # 0622-06 Taillightlens 68-73 smoked eco (2)
- # 0622-07 Taillightlens 68-73 (Eur) eco
- # 0624-5 Taillight assembly 74- Ultima
- # 0666 Indicator switch 8/70-7/71
- # 0679-1 3rd brakelight Type 1 55-7/63
- # 0679-2 3rd brakelight Type 1 8/63-66
- # 0687-20 Interiorlight Type 2 50-67 use # 0687-210 + # 0687-215
- # 1037 Baffle for #1038
- # 1038 Short Stinger, big flange
- # 1213-10 Front wheel brakecylinder ATE 356 pré A Left under - Right upper
- # 1614-050-18 Main bearings .50/2.5 case
- # 2037 Yellow carbon wires
- # 2038 Blue carbon wires
- # 2080 Condensator 1200 71-74 use # 2083
- # 2756 Steering wheel 10' 3 spoke black, black leather
- # 2793 Boss kit Golf/Polo 82->
- # 2941-100 Repairkit for sliding roof Type 2 -67 use # 0386-995 or # 0386-996
- # 3570 Seat padding under rear bottom T181
- # 5500 Rebuilt double port engine 1600 CC
- # 7827 Window inner scraper Type 3 left use # 7527
- # 7828 Window inner scraper Type 3 right use # 7528
- # 8956 GLAS T2 68-79 STAT.GREEN
- # 9496-04 Airmighty 04
- # 9505 F4 Chromoly lightened flywheel 200mm(5.5kg) use # 1571-100
- # 0891-290 Inner side panel left Type 2 69-72 use # 0891-294
- # 0891-291 Inner side panel right Type 2 69-72 use # 0891-295
Price modifications are indicated on the pricelist itself!
You can find these bumper end seals near the connection of the central bumper and the rear ends with Type 2 07/71 front bumpers. The rubber strips make a nice finish and prevent rust by mutual contact and damage of the paint on the metallic parts. Due to UV beams these white strips can fade and harden and upon disassembly or revision of the front bumper we recommend to replace these strips. They are available per pair for 1 bumper from stock.
The master cylinders of our classic cars are all equipped with a return spring, to bring the master cylinder after manipulation back in its initial stand. This spring is however not strong enough to return also the pedal in its initial stand. Therefore Type 1 and Karmann Ghia -07/57 are around the pedal shaftÃ‚Â also foreseen with a spiral steel spring to return the brake pedal. Due to its position on the floor of the body and near the master cylinder filled with corrosive fluid, the spring is very susceptible to corrosion. It gets easily damaged, stuck or breaks so that you can?t use the brake pedal anymore. From now on you can replace the spring by a good new reproduction.
This window channel is an excellent alternative for the felt version of # 0351 and so it?s possible to restore according to the original state. From now on these guides are available each in a length of 1220 mm from stock.
The sliding roof mechanism for Type 1 and Type 2 are vulnerable elements due to their complex construction and lack of maintenance, which can get damaged on several levels. Therefore it isn?t possible to have in stock all the specific parts for these mechanism and to help everybody. Our supplier VW Sunroofs understands this too and together we have decided to cooperate as their exclusive European dealer so that every owner sunroof vehicles can be helped in an efficient way. The parts destined for repair of Type 1 ragtops are subdivided under parts group number 0385-xxx, whereas parts for repair of damages of Type 2 sunroofs are classified under group number 0386-xxx.
Related products#0385-090 Screw set for locking bow, 8 pieces
#0385-100 Chrome hook for sunroof lock
#0385-110 Screwset center lock for sunroof
#0385-120 Spring for centerlock sunroof
#0385-130 Roof tensioner, each
#0385-190 Header spring bar plate assembly, as pair
#0385-220 Bolts and washers for header spring bar plate assembly
#0385-230 Outer guide on spring bar plate, as pair
#0385-260 Outer locking guide on spring bar plate, set
#0385-310 Guiding hoop for sunroof
#0385-320 Phenolic guide plate under side springbar, as pair
#0385-330 Anti rattle packing under side springbar, each
#0385-340 Sponge rubber under side springbar, as pair
#0385-360 Springbar assembly tensioning hoop, as pair
#0385-370 Connection bolt and screw for side springbar, each
#0385-420 Tensioning hoop for sunroof
#0385-430 Rivet for tensioning hoop for sunroof
#0385-440 Trailer bow complete assembly
#0385-450 Rubber sleeves on tensioning hoops for sunroof, 6 pieces
#0385-460 Upper header bow for sunroof
#0385-470 Rivets for Canvas to headerbow, 11 pieces
#0385-480 Tensioning strip, rear
#0385-490 Screw set for rear tensioning strip, 11 pieces
#0385-500 Mounting bolt for upper to lower headerbow, as pair
#0385-510 Springplate side tension strip for sunroof, each
#0385-520 Screwset for side tension strip, original, 4 pieces
#0385-540 Tension strip for sunroof, as pair
#0385-560 Screwset for side tension strip, repro, 10 pieces
#0385-580 Sunroof handle kit
#0385-590 Escutcheon set with spring for sunroof handle
#0385-610 Spring for sunroofhandle
#0385-620 Rubber in sunroofhandle
#0385-640 Aluminium sunroofrails, set
#0385-645 Aluminium sunroofrails, set
#0385-670 Screw set for sunroofrails, 24 pieces
#0385-750 Cone washer and screw M4 x 7 S/S, original
#0385-800 Pinch weld molding for sunroof, Type 2 cockpit headlining
#0386-020 Lower header bow for sunroof, kit
#0386-030 Center lock for sunroof
#0386-200 Header spring bar plate assembly, as pair
#0386-260 Outer locking guide on spring bar plate, set
#0386-280 Guiding hoop for sunroof
#0386-330 Springbar assembly, tensioning hoop, as pair
#0386-370 Tensioning hoop front for sunroof
#0386-380 Tensioning hoop center and rear for sunroof
#0386-400 Rubber sleeves on tensioning hoops for sunroof, 8 pieces
#0386-410 Upper header bow for sunroof
#0386-420 Rivets for Canvas to headerbow, 14 pieces
#0386-430 Tensioning strip rear
#0386-440 Screw set for rear tensioning strip, 13 pieces
#0386-480 Screwset for side tension strip, repro, 14 pieces
#0386-510 Screwset for side tension strip
#0386-530 Aluminium sunroofrails, set
#0386-550 Screw set for sunroofrails, 36 pieces
#0386-560 Square cage nut in sunroofframe M5x8, each
#0386-900 Complete sunroof assembly without rails
#0386-905 Complete sunroof assembly with rails
#0386-995 Rebuildkit, EZ-glide, for sunroof
#0386-996 Rebuildkit, EZ-glide, for sunroof
Type 3 08/67-On request of our customers we have decided to take also this quality of door latches suitable for Type 1 08/67-, Karmann Ghia and Type 3 in stock. These door latches have a nice finishing and are sold a pair, 2 keys inclusive.
These assembly parts are indispensable for a correct fixation without problems of the Karmann Ghia 08/62- emblem (BBT # 0440-21). The spring clips (# 0440-205) are delivered each, the assembly set (# 0440-215) consists of 2 screws and 2 rings for fixation of the base on the body.
Related products#0440-215 Mounting kit base emblem, front
Type 3 08/67-07/74113 201 157
To intercept the differences of pressure caused by expansion of the fuel in the fuel tank, there is a breather that is connected on the filler tube of the fuel tank. The T-piece can get fragile and break due to fuel vapors, manipulation or the luggage in the front luggage boot. BBT can offer you a replacing item from stock.
Type 3 08/67-07/74113 201 215
These rubber seals sit around the petrol filler connections and prevent that awkward fuel vapors can escape. Available from now on each from stock.
Good fuel tanks for Type 2 -?07/67 buses aren?t easy to be found in a good reproduction. Partly due to the limited offer and also because good used fuel tanks are not available in large numbers. Nevertheless many fuel tanks need to be replaced once in a while as they can be damaged by moisture and/or sludge. From now on we can offer you an as good as original reproduction from stock.
Type 2 55-61311 919 051
Originally it has been applied on Type 2 55-61 and Type 1 1961 where no standard sender had to be installed, though this block off plate can be used for all purpose. The block off and screws can be delivered separately from stock under # 0494-50. The block off plate is available each from stock.
The breather tube which we have now in our assortment can be found at the top of the fuel tank. When filling the fuel tank this tube makes that the overpressure can escape from the one side to the other side. Available each from stock, nipples included.
These lock knobs are used to lock the front doors and they sit on top of the door through the body. They are guided by a PVC ring to ensure a good manipulation. These guides can get damaged by age and need to be replaced. From now on BBT can deliver these guides each from stock.
Type 2 08/67-07/68
Type 3 08/67-07/68
Type 4 08/68-07/74311 837 595
This buffer for window winder gives a nice finish to the crank driving shaft and a correct position of the door panel in respect to the crank. This ring can get damaged as a result from intensive use or it gets lost during restoration. We can deliver you now a correct reproduction each from stock.
This window winder buffer is the finishing touch of the window crank and positions door panel with regard to the crank. Due to frequent use this buffer can get damaged or it happens that it gets lost during restoration. We can deliver you now a good reproduction each from stock.
The sun visor clips on Type 25 buses can get fragile and tear off after many years of use. We offer you now the possibility to replace damaged clips by a pair of new ones. Available per pair in black.
The headlight lense for -07/67 Type 1 Beetles and Type 2 buses is clamped in the chrome headlight trim by means of clips of steel. These clips can easily corrode because of their assembly position. They can even break down or get lost during restoration. From now on BBT can deliver these clips each from stock. For each headlight you need 7 of them.
With these lenses of PVC it?s perfectly possible to replace the white lenses, delivered with BBT # 0608 chrome reversing light Hella, so that you can use this light as direction indicator, stopping light and/or rear fog light. The lenses are sold each.
Related products#0608-102 Orange lens for reversing light, Hella
To insure a waterproof connection of the reverse light/rear fog light (BBT # 0608), a connecting wire is directed through a rubber bushing. This rubber boot hardens after many years of exposure to the elements, as a result to guarantee the moisture resistance their replacement will be necessary. We can deliver this boot each from stock.
These red lenses are located in the rear taillights and they are essential to be seen in the traffic after sunrise. Faded and/or torn items can be replaced by these nice reproductions. Available each from stock.
Related products#0612-820 Tail light lens
From 08/59 till 07/61 front indicator lenses are used on Type 2, which were placed near the upper door hinges. These indicator lights consisted of a casing and a pointed orange lens, also called nipple indicator light. BBT offers you a transparent model as alternative of these orange lenses. From now on available each from stock.
The taillight on Type 1 08/55-07/61 is foreseen of 1 duplex bulb which fits into the bulb holder with 2 connections. This bulb holder is accordingly clamped with a spring to the light housing. Many of these bulb holders are damaged after many years by corrosion or broken clips. From now on BBT can deliver a good reproduction each from stock with screwed as well as plug connection.
The rear taillights of Type 1 08/55-07/61 are fixed on the fender by means of clips. These clips get often damaged during disassembly by breaking of the screw thread or the contact for mass conduction has been impeded. BBT can from now on deliver these clips of both side each from stock.
Related products#0627-550 Taillight housing holder right
The indicator switches are a frequently used partÃ‚Â byÃ‚Â courteous drivers, which are however very susceptible to use. Dust and humidity can also prevent the proper functioning of this switch.Ã‚Â From now on we can deliver a replacing item from stock. # 0669-420 contains the complete unit inclusive the housing and assembly support, whereas # 0669-425 includes only the switch part with wiring and lever.
Related products#0669-425 Turn signal switch without housing
These license light lenses can be found in the license light casing on the motor hood. Due to influences of temperature of the light on the one hand and the heath of the engine on the other hand, these lenses are very susceptible to age. They will yellowing and become fragile, so that the transparency disappears and the possibility of cracks grows. From that moment the license light is no longer protected, which can lead to damages of the license light or even a short-circuiting. BBT can deliver from now on the correct model in a good quality, each from stock.
Related products#0689-105 License light lens
The door hinge pins for lateral cargo doors are protected against humidity by means of plugs which fit in the hollow pins. These plugs are often missing on many buses, so that dirt and humidity can damage the hinges. These plugs are located at the under- and upper side the hinges. They are sold each. For 1 bus you need 8 of them.
This PVC lever is often deformed and/or broken off on many Type 25 buses due to heavy use. They need to be replaced to ensure manipulation of the heating and ventilation in a comfortable way. From now on we can deliver a good reproduction from stock.
Between the lens and the casing of the rear taillight on Type 1 08/55-07/61 you can find a rubber ring which prevents the soaking of water. This seal can harden after many years and needs to be replace by a new one. From now on we can deliver this seal each from stock.
At the underside of Super beetles 08/71- frame head you can find at both sides an elongated hole, which allows inspection and maintenance of the hollow frame head compartment. If these rubber bungs are no longer on their place, humidity can penetrate into this compartment and quickly inflict rust and perforations on the frame. You can replace now lost items by these reproductions of quality. Available each from stock. Used per pair on 1 vehicle.
We?ve taken this front wheel arch in stock as alternative for the more and more expensive original version. The front wheel arch is made of 1.20mm thick steel plate which guarantees a durable repair of a rusted and/or damaged item. Available each per side from stock.
Related products#0891-105 Front wheel arch, right, complete, Brazil
Cold start with diesel engines goes together with pulling out the starter handle, that forces the injection via a cable in the diesel injection pump, in order that the engine will start quicker. If this PVC handle has been damaged, the correct functioning of the cable may become a problem, so you can?t start a cold engine anymore. We can deliver you from now on a PVC handle each from stock.
The connection between master cylinder and brake fluid reservoir with Type 1 beetle is made by means of a steal tube connected with flexible tubes. The flexibles are susceptible for corrosion due to the corrosive characteristics of the brake fluid and its position underneath the vehicle. It can cause leakage in the brake circuit. From now on we can present you a replacing item from stock.
These PVC clips are used to fix the metallic brake lines at the underside of the chassis. When manipulating the brake lines for repair or replacement it?s a common problem that these clips will break and cannot be used again for the assembly of the brake lines. On 1 vehicle 7 clips are used, clips are available each from stock.
This bearing made according to the original model is located in the steering column and takes care of the accurately turning around free of play of the steering shaft. Dust and drying up can damage this bearing and you get play on the draglink involving some nasty consequences. From now on we can deliver this bearing each from stock.
This boot can be found at the underside of the 5-speed shift on Type 25 buses and it protects the spring which returns the shifter back in normal position after selection of the 1st or reverse gear. If this boot has been damaged, dirt and humidity can get into the spring mechanism, so that it gets stuck and shifting gear becomes a problem. From now on the boot is available each from stock.
Ø 83 mm - 64 mm
-07/69This piston & cylinder kit from AA Performance is suitable to tune the engine block from 1200cc to a cylinder capacity of 1385cc. Ã‚Â The Ã‚Â side of the case needs a boring of 87mm for a correct assembly, the side of the cylinder head needs a boring of 90mm.Ã‚Â This kit contains 4 cylinders, 4 pistons, 4 piston pins and 4 pair of clips to secure the piston pins. From now on these kits are available from stock.
This boot sits between intake and airflow meter on buses with DH, GW 1.9l engines and DJ 2.1l engines with injection. Temperature variations and pollution by oil or fuel can damage the boot so that it becomes fragile and can crack. From now on we can deliver this boot each from stock to replace damaged items.
Type 14 08/66-07/67113 955 541B 567
The wiper switch knob is one of the second-hand parts which we definitely had very close to the counter in our shop. These central knobs with metallic rod are most of the times lost and therefore we had to help our customers with a second-hand item. From now on we can deliver a good reproduction wiper switch know in ivory (# 2444-150) or grey (# 2444-151).
Related products#2444-151 Wiper switch knob, grey
The dashboard of a Type 1 Superbeetle 08/72- was meant to be a definite leap forwards regarding design, functionality and safety, however in the eyes of many Beetle fans esthetically it was a decline. The nice painted metallic dashboard was no longer visible, so there was less Vintage look. The modern looking dashboard contains many PVC parts, which get lost or damaged in course of time. The PVC patterns that we deliver from stock are a solution if you want to replace these lost items.
Related products#2670-505 Rectangular strip in dash Superbeetle
#2670-510 Screw cover in dash Superbeetle
Type 25 buses become more and more popular with many classic Volkswagen fans. That?s why we keep expanding our offer of parts for these buses. This speedometer cable has been used on buses with the so-called Synchro 4-wheel drive and connects the speed indication meter and front drive transmission housing. A damaged cable can be replaced now with these item available from stock.
The adjusting device of the front seats is controlled by a lever that is located at the outside of the front seat. This PVC knob that sits on this lever has often disappeared after many years and a new knob is the best solution to adjust the front seat in a comfortable manner. The knob is delivered each from stock and can be installed on both sides.
The headrests with Karmann Ghia from 01/69- are installed on the front seats and are kept into position by means of 2 PBC guide posts. Due to age or manipulation these PVC posts can get damaged and need to be replaced, so that the headrests can be securely kept in the correct position. We can deliver these posts from now on each from stock.
Related products#3280-220 Exhaust, Vintage Speed, with pre-heat risers, Stainless steel
Lasting qualitative restorations can only be made, when using the correct parts and that?s why we have added these front window seals to our already extensive offer of body seals. Available each from stock.
This PVC cover protects the sliding door lock. By hurting or disassembly you can damage the cover and it needs to be replaced to cover the lock properly. We can deliver the cap each from stock.